User Interface for the Dynamic Policy Manager Application

The application adds one new command to JUNOS:

show sync dpm subscribers

This command displays the subscribers that are currently logged in and categorizes them by class. The subscribers shown are a result of the latest status received from the control component on the PIC, which is reported as the state of any subscriber changes; however, if the configuration changes, the status is cleared. For details about the classes, see Sample Configuration.

Sample output is as follows:

router> show sync dpm subscribers

Class silver

Subscribers currently logged in:


Class gold

Subscribers currently logged in:


The DDL source for the new command is in the file sandbox/src/juniper/sdk/junos/examples/src/lib/ddl/input/dpm_mgmt.cmd.dd.

System Configuration for the Dynamic Policy Manager Application

2007-2009 Juniper Networks, Inc. All rights reserved. The information contained herein is confidential information of Juniper Networks, Inc., and may not be used, disclosed, distributed, modified, or copied without the prior written consent of Juniper Networks, Inc. in an express license. This information is subject to change by Juniper Networks, Inc. Juniper Networks, the Juniper Networks logo, and JUNOS are registered trademarks of Juniper Networks, Inc. in the United States and other countries. All other trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.
Generated on Sun May 30 20:26:47 2010 for Juniper Networks Partner Solution Development Platform JUNOS SDK 10.2R1 by Doxygen 1.4.5