replication_data_s Struct Reference

#include <monitube-data_ha.h>


Data Fields

uint32_t bucket
 hashtable bucket number (HT BUCKET field)
in_addr_t daddr
 flow destination address (HT Key/Identifier field)
uint16_t dport
 flow destination port (HT Key/Identifier field)
time_t age_ts
 flow age timestamp
uint32_t ssrc
 current RTP source
source_t source
 RTP state of last known packet.
uint32_t rate
 drain rate of RTP payload
in_addr_t maddr
 mirror IP address
uint32_t m_vrf
 mirror with outgoing VRF
char mon [MAX_MON_NAME_LEN]
 monitor name


Detailed Description

Replication data of flow state to send to backup/slave for its flow table

Definition at line 38 of file monitube-data_ha.h.


The documentation for this struct was generated from the following file:
2007-2009 Juniper Networks, Inc. All rights reserved. The information contained herein is confidential information of Juniper Networks, Inc., and may not be used, disclosed, distributed, modified, or copied without the prior written consent of Juniper Networks, Inc. in an express license. This information is subject to change by Juniper Networks, Inc. Juniper Networks, the Juniper Networks logo, and JUNOS are registered trademarks of Juniper Networks, Inc. in the United States and other countries. All other trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.
Generated on Sun May 30 20:27:02 2010 for SDK Your Net Corporation Monitube IPTV Monitoring Example: monitube-data 1.0 by Doxygen 1.5.1