hellopics_ipc.h File ReferenceConstants and types used for SYNC Hellopics IPC. More...
Go to the source code of this file.
Constants and types used for SYNC Hellopics IPC.
Constants for understanding and building request and reply IPC messages between the mgmt/ctrl/data components.
Definition in file hellopics_ipc.h.
|#define HELLOPICS_PORT_NUM 7078
Enumeration Type Documentation
The applicable component IDs
The ID value for the management component. |
The ID value for the control component. |
The ID value for the data component. |
Definition at line 49 of file hellopics_ipc.h.
Applicable IPC Message subtypes:
Message contains the component ID. |
Message idicates that the sending component is ready. |
Message idicates a request for the other PIC's peer info. |
Message contains the other PIC's peer info. |
Message idicates a HELLO message cycled between components. |
Definition at line 38 of file hellopics_ipc.h.
© 2007-2009 Juniper Networks, Inc. All rights reserved. The information contained herein is confidential information of Juniper Networks, Inc., and may not be used, disclosed, distributed, modified, or copied without the prior written consent of Juniper Networks, Inc. in an express license. This information is subject to change by Juniper Networks, Inc. Juniper Networks, the Juniper Networks logo, and JUNOS are registered trademarks of Juniper Networks, Inc. in the United States and other countries. All other trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.
Generated on Sun May 30 20:26:58 2010 for SDK Your Net Corporation Hellopics Example: hellopics-ctrl 1.0 by Doxygen 1.5.1