update_app_info_s Struct Reference

#include <equilibrium_ipc.h>


Data Fields

in_addr_t app_addr
 application's facade IP address
uint16_t app_port
 application's port
uint16_t session_timeout
 application's session timeout
uint16_t connection_interval
 server-connection interval (sec)
uint16_t connection_timeout
 server-connection timeout (sec)
uint8_t timeouts_allowed
 server timeouts allowed #
uint8_t pad
 ignored
uint16_t down_retry_interval
 down server connection interval (sec)
uint16_t svc_set_id
 service-set id
uint16_t app_name_len
 application name's length
char app_name [0]
 application name


Detailed Description

Message containing info about the application Note, when connection_interval = 0, it indicates no monitor should be used

Definition at line 88 of file equilibrium_ipc.h.


The documentation for this struct was generated from the following file:
2007-2009 Juniper Networks, Inc. All rights reserved. The information contained herein is confidential information of Juniper Networks, Inc., and may not be used, disclosed, distributed, modified, or copied without the prior written consent of Juniper Networks, Inc. in an express license. This information is subject to change by Juniper Networks, Inc. Juniper Networks, the Juniper Networks logo, and JUNOS are registered trademarks of Juniper Networks, Inc. in the United States and other countries. All other trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.
Generated on Sun May 30 20:26:57 2010 for SDK Your Net Corporation Equilibrium Load Balancer Example: equilibrium-mgmt 1.0 by Doxygen 1.5.1