flag vsys-ok

Mode: Configuration Mode

Description:

The vsys-ok flag indicates that the command or argument is allowed in all logical-systems. Without this flag, the ddl entity will not be present in any logical-systems other than the principal logical-system.

Example:

        command show {
            help "Display system data";
            flag vsys-ok;

            command newbie {
                help "Newbie section";
                flag vsys-ok;

                command uid {
                    help "User ID";
                    type unit
                    flag vsys-ok;
                }
            }
        }

Display:

Principal logical-system

        user@router> show newbie ?
        Possible completions:
          <[Enter]>           Execuite this command
          uid                 User ID

Logging in as logical-system user (without "flag vsys-ok")

        user@router> show newbie ?
        Possible completions:
          <[Enter]>           Execuite this command

Logging in as logical-system user (with "flag vsys-ok")

        user@router> show newbie ?
        Possible completions:
          <[Enter]>           Execuite this command
          uid                 User ID

Topics for further reading:

See also:

Reference (to programmers guide/style guide):


2007-2008 Juniper Networks, Inc. All rights reserved. The information contained herein is confidential information of Juniper Networks, Inc., and may not be used, disclosed, distributed, modified, or copied without the prior written consent of Juniper Networks, Inc. in an express license. This information is subject to change by Juniper Networks, Inc. Juniper Networks, the Juniper Networks logo, and JUNOS are trademarks of Juniper Networks, Inc.
Generated on Sun May 30 20:23:13 2010 for DDL Reference Guide by doxygen 1.4.5