flag no-fips

Mode: Operational Mode


The no-fips flag indicates that the command or argument is not allowed in FIPS mode.


            command newbie {
                help "Show newbie";

                argument weak-encryption {
                    help "Example newbie encryption";
                    flag no-fips;
                    type string;


FIPS router
        user@frouter> show version
        Hostname: frouter
        Model: t320
        JUNOS Software Release [8.1R1] (FIPS edition)
        user@frouter> show example newbie ?
        Possible completions:
          <[Enter]>            Execute this command
          |                    Pipe through a command

non-FIPS router
        user@router> show version
        Hostname: router
        JUNOS Software Release [8.1R1]
        user@router> show example newbie ?
        Possible completions:
          <[Enter]>            Execute this command
          weak-encryption      Example newbie encryption
          |                    Pipe through a command

Topics for further reading:

See also:

Reference (to programmers guide/style guide):

2007-2008 Juniper Networks, Inc. All rights reserved. The information contained herein is confidential information of Juniper Networks, Inc., and may not be used, disclosed, distributed, modified, or copied without the prior written consent of Juniper Networks, Inc. in an express license. This information is subject to change by Juniper Networks, Inc. Juniper Networks, the Juniper Networks logo, and JUNOS are trademarks of Juniper Networks, Inc.
Generated on Sun May 30 20:23:13 2010 for DDL Reference Guide by doxygen 1.4.5