flag master-only

Mode: Configuration Mode

Description:

Flag master-only indicates that the ddl entity is only available under the principal logical-system.

Example:

        object newbie {
            help "Newbie section";

            attribute uid {
                help "User id";
                type ranged int 16 .. 511;
                flag master-only;
            }
        }

Display:

Principal logical-system

        user@router# set newbie ?
        Possible completions:
          <[Enter]>           Execuite this command
        + apply-groups        Groups from which to inherit configuration data
        + apply-groups-except Don't inherit configuration data from these groups
          uid                 User ID (16..512)
          |                   Pipe through a command
        [edit]

Logging in as logical-system user

        user@router# set newbie ?
        Possible completions:
          <[Enter]>           Execuite this command
        + apply-groups        Groups from which to inherit configuration data
        + apply-groups-except Don't inherit configuration data from these groups
          |                   Pipe through a command
        [edit]

Topics for further reading:

See also:
flag vsys-ok

Reference (to programmers guide/style guide):


2007-2008 Juniper Networks, Inc. All rights reserved. The information contained herein is confidential information of Juniper Networks, Inc., and may not be used, disclosed, distributed, modified, or copied without the prior written consent of Juniper Networks, Inc. in an express license. This information is subject to change by Juniper Networks, Inc. Juniper Networks, the Juniper Networks logo, and JUNOS are trademarks of Juniper Networks, Inc.
Generated on Sun May 30 20:23:12 2010 for DDL Reference Guide by doxygen 1.4.5