flag allow-iso-addr


                  flag allow-iso-addr
                  flag allow-iso-prefix
                  flag allow-iso-sysid

Mode: Configuration Mode


Usually, ip addresses types do not accept ISO addresses be configured, flag allow-iso-addr, flag allow-iso-prefix, and, flag allow-iso-sysid allow the corresponding ISO addresses or prefixes be configured with ip address types.


        object allowed-user {
            help "Example user entries";
            flag remove-empty;

            attribute host-address {
                help "Host IP address";
                flag setof list;
                flag allow-iso-addr;
                type ipv4addr;


        user@router# set jnx-example allowed-user host-address?
        Possible completions:
        + host-address         Host IP or ISO address
        user@router# set jnx-example allowed-user host-address 47.1234.0000.1234.01

        user@router# set jnx-example allowed-user host-address

        user@router# show jnx-example
        allowed-user {
            host-address [ 47.1234.0000.1234.01 ];


Topics for further reading:

See also:

Reference (to programmers guide/style guide):

2007-2008 Juniper Networks, Inc. All rights reserved. The information contained herein is confidential information of Juniper Networks, Inc., and may not be used, disclosed, distributed, modified, or copied without the prior written consent of Juniper Networks, Inc. in an express license. This information is subject to change by Juniper Networks, Inc. Juniper Networks, the Juniper Networks logo, and JUNOS are trademarks of Juniper Networks, Inc.
Generated on Sun May 30 20:23:12 2010 for DDL Reference Guide by doxygen 1.4.5