Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Removing a Charge

    This procedure shows how to enter maintenance mode to halt new sessions from being started and to verify that there are no sessions remaining before removing a change.

    Before you begin, you should have:

    • Entered configuration mode in the CLI.

    To delete a charge:

    1. Activate Maintenance Mode for the charging profile containing the charge to be deleted.
      user@host# set unified-edge gateways ggsn-pgw gw-name charging-profiles profile-name service-mode maintenance user@host# commit
    2. Verify that the charging gateway is in maintenance mode.
      user@host#run show unified-edge ggsn-pgw charging service-mode profile profile-name gateway gw-name

      Verify that no subscribers are still active on this charging profile.

      user@host# run show unified-edge ggsn-pgw charging service-mode profile profile-name gateway gw-name
    3. (Optional) Operators can terminate sessions using a charging profile by entering the clear command
      user@host# clear unified-edge ggsn-pgw subscribers charging -profile profile-name gatewaygw-name
    4. When the subscriber count is zero and all sessions are ended, operators can make and commit changes to charging profile attributes in active maintenance mode.

      Note: All modifications of variables must be made in active maintenance mode or they will fail.

    5. Delete the charging profile and exit maintenance mode.
      user@host delete unified-edge gateways ggsn-pgw gw-name charging-profile profile-name maintenace-mode user@host# commit
    6. Verify that changes were properly committed.
      user@hostshow unified-edge ggsn-pgw subscribers charging trasport-profile profile-name gateway gw-name


    Published: 2011-11-16