Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Changing a Trigger Profile

    This procedure describes how to use maintenance mode to change a trigger profile. You must first halt new sessions from being started and verify that there are no active sessions remaining.

    To change a trigger profile:

    1. Enter configuration mode in the CLI.
      user@host> configure
    2. Activate maintenance mode for a charging trigger profile:
      user@host# set unified-edge gateways ggsn-pgw gw-name charging trigger-profiles profile-name service-mode maintenanceuser@host# commit
    3. Verify that the charging gateway is in maintenance mode.
      user@host# run show unified-edge ggsn-pgw charging service-mode trigger-profile profile-name gateway gw-name

      Verify that there are no subscribers active on this charging profile.

      user@host# run show unified-edge ggsn-pgw subscribers charging trigger-profile profile-name gateway gw-name
    4. (Optional) Terminate sessions using the clear command
      user@host# run clear unified-edge ggsn-pgw subscribers charging trigger-profile profile-name gateway gw-name
    5. When the subscriber count for the charging profile and all CDRs generated for the charging profile is zero, you can make and commit changes to the charging trigger profile in active maintenance mode.

      Note: These modifications must be made in active maintenance mode or they will fail.

    6. Modify the charging trigger profile.
    7. Commit your changes and exit maintenance mode.
      user@host# delete unified-edge gateways ggsn-pgw gw-name charging trigger-profile profile-name service-mode commit
    8. Verify that changes were properly committed.
      user@host# run show configuration unified-edge ggsn-pgw gateway gw-name
    9. Return the gateway to operational state.
      user@host# run show unified-edge ggsn-pgw gateway service-mode

    Published: 2011-11-16