Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Related Documentation




    s5 { echo-interval interval;echo-n3-requests requests;echo-t3-response response-interval;interface interface-name v4-address [ip-address];n3-requests requests;path-management (enable | disable);t3-response response-interval;control {dscp-code-point value;echo-interval interval;echo-n3-requests requests;echo-t3-response response-interval;forwarding-class class-name;interface interface-name v4-address [ip-address];n3-requests requests;path-management (enable | disable);t3-response response-interval;}data { echo-interval interval;echo-n3-requests requests;echo-t3-response response-interval;error-indication-interval seconds;interface interface-name v4-address [ip-address];n3-requests requests;path-management (enable | disable);t3-response response-interval;}}

    Hierarchy Level

    [edit unified-edge gateways ggsn-pgw name gtp]

    Release Information

    Statement introduced in Junos OS Mobility Release 11.2W.


    Configure 3GPP control and data parameters applicable to the 3GPP s5 interface. The values configured here override the common control and data configuration. The parameters configured are common and apply across all GTP peers that connect to the interface. For example, the s5 configuration block may have the following parameters: control, data, and so on.

    Required Privilege Level

    interface—To view this statement in the configuration.

    interface-control—To add this statement to the configuration.


    Related Documentation


    Published: 2011-11-17