Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    interface (Multiservices PIC)


    interface interface-name;

    Hierarchy Level

    [edit unified-edge gateways ggsn-pgw gateway-name system anchor-spics]

    Release Information

    Statement introduced in Junos OS Mobility Release 11.2W.


    Configure the interface representing the Multiservices PIC used for the mobile control plane in the broadband gateway. The following conditions are applicable to the Multiservices PIC interfaces configured here:

    • The aggregated multiservices interfaces (ams) specified in this statement must already be defined at the [edit interfaces] hierarchy level.
    • The Multiservices PIC must have the jservices-mobile package configured at the [edit chassis fpc slot-number pic pic-number adaptive-services service-package extension-provider] hierarchy level.
    • If a Multiservices PIC interface is a member of an aggregated multiservices interface, then that member interface cannot be specified here. For example, if mams-2/0/0 is a member interface of the aggregated multiservices interface ams0, then ms-2/0/0/ cannot be directly specified here.


    interface-name—Name of the interface representing the Multiservices PIC or aggregated Multiservices PIC.

    Syntax: The interface must be a valid multiservices interface (ams or ms-a/b/0, where a is the Flexible PIC Concentrator [FPC] slot number and b is the PIC slot number). For example, ams0 or ms-1/0/0.

    Required Privilege Level

    interface—To view this statement in the configuration.

    interface-control—To add this statement to the configuration.

    Published: 2011-11-22