Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    cdr-profiles

    Syntax

    cdr-profiles profile-name {description string;enable-reduced-partial-cdrs;exclude-ie-options {apn-ni;apn-selection-mode;cc-selection-mode;dynamic-address;list-of-service-data;list-of-traffic-volumes;lrsn;ms-time-zone;network-initiation;node-id;pdn-connection-id;pdppdn-type;pgw-plmn-identifier;rat-type;record-sequence-number;served-imeisv;served-msisdn;served-pdppdn-address;serving-node-plmn-identifier;start-time;stop-time;user-location-information;}}

    Hierarchy Level

    [edit unified-edge gateways ggsn-pgw gateway-name charging]

    Release Information

    Statement introduced in Junos OS Mobility Release 11.2W.

    Description

    Configure a Charging Data Record (CDR) profile. The configuration in the CDR profile determines the content or the information that is included in a CDR and is used for billing purposes.

    By default, the Juniper Charging Service (J-CS) module adds all the required fields mandated by the Third Generation Partnership Project (3GPP) standards to the CDR. However, you can exclude the provisional fields information from the CDR by configuring a CDR profile.

    The maximum number of CDR profiles supported for a P-GW is 16.

    The remaining statements are explained separately.

    Options

    profile-name

    Name of the CDR profile.

    Range: 1 through 128 bytes

    Required Privilege Level

    interface—To view this statement in the configuration.

    interface-control—To add this statement to the configuration.

    Published: 2011-11-16