TechLibrary

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

apn-services

Syntax

apn-services {apns {[name] {aaa-profile aaa-profile;address-assignment {aaa;allow-static-ip-address {no-address-verify;}dhcp-proxy-client {aaa-override;}dhcpv4-proxy-client-profile {logical-system logical-system;pool-name pool-name;profile-name profile-name;routing-instance routing-instance;}dhcpv6-proxy-client-profile{logical-system logical-system;pool-name pool-name;profile-name profile-name;routing-instance routing-instance;}inet-pool {exclude-pools [value];group group;pool pool;}inet6-pool {exclude-v6pools [value];group group;pool pool;}local {aaa-override;}}anonymous-user {password password;(use-apnname | use-imsi | use-msisdn | user-name username);}apn-data-type (ipv4 | ipv4v6 | ipv6);apn-type (real | virtual | virtual-pre-authenticate);block-visitors;charging {default-profile default-profile;home-profile home-profile;profile-selection-order [profile-selection-method];roamer-profile roamer-profile;visited-profile visited-profile;}description description;dns-server {primary-v4 primary-v4;primary-v6 primary-v6;secondary-v4 secondary-v4;secondary-v6 secondary-v6;}idle-timeout idle-timeout;idle-timeout-direction (both | uplink);inter-mobile-traffic {(deny | redirect redirect);}local-policy-profile local-policy-profile;maximum-bearers maximum-bearers;mobile-interface mobile-interface;nbns-server {primary-v4 primary-v4;secondary-v4 secondary-v4;}p-cscf{[address];}restriction-value restriction-value;selection-mode {(from-ms | from-sgsn | no-subscribed);}service-mode service-mode-options;service-selection-profile service-selection-profile;session-timeout session-timeout;verify-source-address {disable;}wait-accounting;}}}

Hierarchy Level

[edit unified-edge gateways ggsn-pgw gateway-name]

Release Information

Statement introduced in Junos OS Mobility Release 11.2W.

Description

Configure the access point name (APN) selection function for the broadband gateway. The APN selection function determines whether the broadband gateway is responsible for servicing the subscriber. If the gateway is responsible, then the APN selection function selects the Packet Data Network (PDN) service that is applicable for the subscriber. You can configure different parameters related to the device, network, and subscription to provide an enhanced selection function.

The APN selection function determines which APN and service types a Mobile Station (MS) or user equipment (UE) device should use.

The remaining statements are explained separately.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.