Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    address-assignment (APN)

    Syntax

    address-assignment {aaa;allow-static-ip-address {no-address-verify;}dhcp-proxy-client {aaa-override;}dhcpv4-proxy-client-profile {logical-system logical-system;pool-name pool-name;profile-name profile-name;routing-instance routing-instance;}dhcpv6-proxy-client-profile{logical-system logical-system;pool-name pool-name;profile-name profile-name;routing-instance routing-instance;}inet-pool {exclude-pools [value];group group;pool pool;}inet6-pool {exclude-v6pools [value];group group;pool pool;}local {aaa-override;}}

    Hierarchy Level

    [edit unified-edge gateways ggsn-pgw gateway-name apn-services apns name]

    Release Information

    Statement introduced in Junos OS Mobility Release 11.2W.

    Description

    Configure the address assignment parameters for an access point name (APN). These parameters are used by the broadband gateway to assign IP addresses to mobile devices.

    The following methods of allocating IP addresses are supported by the broadband gateway:

    • AAA—IP addresses are allocated by the authentication, authorization, and accounting (AAA) server.
    • DCHP—IP addresses are allocated by the broadband gateway using the IP addresses returned by the Dynamic Host Configuration Protocol (DHCP) server. The broadband gateway uses the information configured in the DHCP proxy client profile to access the IP address returned by the DHCP server.
    • Local—IP addresses are allocated by the broadband gateway using a local mobile pool or mobile pool group configured on the APN. If a mobile pool or a mobile pool group is not specified, then the default mobile pool is used to assign the IP address. The default pool is configured in the routing instance that is associated with the mobile interface of the APN.

    Required Privilege Level

    interface—To view this statement in the configuration.

    interface-control—To add this statement to the configuration.

    Published: 2011-11-22