Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    show interfaces load-balancing (Aggregated Multiservices)

    Syntax

    show interfaces load-balancing<detail><interface-name>

    Release Information

    Command introduced in Junos OS Mobility Release 11.2W.

    Description

    Display information about the aggregated multiservices interface (ams) as well as its individual member interfaces and the status of the replication state.

    Options

    none

    Display a summary of the aggregated multiservices interface information.

    detail

    (Optional) Display the specified level of output.

    interface-name

    (Optional) Name of the aggregated multiservices interface (ams). If this is omitted, then the information for all the aggregated multiservices interfaces, including those used in control plane redundancy and high availability (HA) for service applications, is displayed.

    Required Privilege Level

    view

     

    Related Documentation

     

    List of Sample Output

    show interfaces load-balancing
    show interfaces load-balancing detail
    show interfaces load-balancing ams0 detail

    Output Fields

    Table 1 lists the output fields for the show interfaces load-balancing command. Output fields are listed in the approximate order in which they appear.

    Table 1: show interfaces load-balancing Output Fields

    Field Name

    Field Description

    Level of Output

    Interface

    Aggregated multiservices interface (ams).

    detail none

    State

    State of the aggregated multiservices interface. The following states are possible:

    • Wait for Members—None of the member interfaces are powered on yet.
    • Members Seen—All of the member interfaces are online.
    • Wait Timer—At least one of the member interfaces has joined the ams interface.
    • Up—The ams interface is up with the current joined member interfaces.

    detail none

    Last change

    Time (in hh:mm:ss [hours:minutes:seconds] format) when the state last changed.

    detail none

    Members

    Number of member interfaces (mams-).

    none

    Member count

    Number of member interfaces (mams-).

    detail

    HA Model

    High availability (HA) model supported on the interface.

    detail none

    Members

    The following information about the member interfaces is displayed:

    • Interface—Name of the member interface.
    • Weight—This output can be ignored for the current release.
    • State—Indicates the state of the member interface (mams-). The following states are possible:
      • Active—The member is an active member.
      • Backup—The member is a backup.
      • Discard—The member has not yet rejoined the ams interface after failure.
      • Down—The member has not yet powered on.
      • Inactive—The member has failed to rejoin the ams interface within the configured rejoin-timeout.
      • Invalid—The Multiservices PIC corresponding to the member interface has been configured but is not physically present in the chassis.

    detail

    Sync-state

    Synchronization (sync) status of the control plane redundancy. The sync state is displayed only when the ams interface is Up.

    • Interface—Name of the member interface.
    • Status—The synchronization status of the member interfaces.
      • In progress—The active member is currently synchronizing its state information with the backup member.
      • In sync—The active member has finished synchronizing its state information with the backup and the backup is ready to take over if the active member fails.
      • NA (Not applicable)—The backup member is not yet ready to synchronize with the active (primary) member. This may occur if the backup is still powered off or still booting.
      • Unknown—The daemons are still initializing and the state information is unavailable.

    detail

    Sample Output

    show interfaces load-balancing

    user@host> show interfaces load-balancing
    Interface  State       Last change  Members  HA Model
    ams0       Up          00:10:02     4        Many-to-One
    
    

    show interfaces load-balancing detail

    user@host> show interfaces load-balancing detail
    Load-balancing interfaces detail
    Interface        : ams0
      State          : Up
      Last change    : 00:10:23
      Member count   : 4
      HA Model       : Many-to-One
      Members        :
          Interface    Weight   State
          mams-4/0/0   10       Active
          mams-4/1/0   10       Active
          mams-5/0/0   10       Active
          mams-5/1/0   10       Backup
      Sync-state     :
          Interface    Status
          mams-4/0/0   Unknown
          mams-4/1/0   Unknown
          mams-5/0/0   Unknown
    
    

    show interfaces load-balancing ams0 detail

    user@host> show interfaces load-balancing ams0 detail
    Load-balancing interfaces detail
    Interface        : ams0
      State          : Up
      Last change    : 00:11:28
      Member count   : 4
      HA Model       : Many-to-One
      Members        :
          Interface    Weight   State
          mams-4/0/0   10       Active
          mams-4/1/0   10       Active
          mams-5/0/0   10       Active
          mams-5/1/0   10       Backup
      Sync-state     :
          Interface    Status
          mams-4/0/0   Unknown
          mams-4/1/0   Unknown
          mams-5/0/0   Unknown
    
    

    Published: 2011-11-22