Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
request interface load-balancing switchover (Aggregated Multiservices)
Syntax
request interface load-balancing switchover interface-name<force>
Release Information
Command introduced in Junos OS Mobility Release 11.2W.
Description
Switch the active member interface to the backup state.
In the case of mobile control plane redundancy, the behavior depends on the replication state of the member interface:
- If the sync state is in-sync, then the active member is rebooted and the backup member becomes the new active member.
- If the sync-state is in-progress, then the force option must be used to force the switchover.
Warning: In this case, there is a risk of losing subscriber information because the synchronization has not yet been completed.
Options
interface-name | — | Name of the member interface. The member interface format is mams-a/b/0, where a is the FPC slot number and b is the PIC slot number. |
force | — | (Optional) Force the switchover from the active member to the backup member. |
Required Privilege Level
view
List of Sample Output
request interface load-balancing switchover force mams-4/0/0 (Aggregated Multiservices)Output Fields
When you enter this command, you are provided feedback on the status of your request.
Sample Output
request interface load-balancing switchover force mams-4/0/0 (Aggregated Multiservices)
user@host> request interface load-balancing
switchover force mams-4/0/0Switchover Initiated
