Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Example: Changing a Charging Profile

    This example shows how to change a charging profile using maintenance mode.

    Requirements

    This example uses the following hardware and software components:

    • An installed and operational MX Series chassis
    • Junos OS MobileNext Broadband Gateway package

    Overview

    This configuration example shows how to place the charging profile named juniper in maintenance mode . Once in Maintenance mode, you can make changes to charging profile attributes without affecting mobility subscribers using other charging profiles.

    Configuration

    Step-by-Step Procedure

    To change a charging profile:

    1. Verify the current status of maintenance mode for this charging profile.
      user@host> show unified-edge ggsn-pgw charging service-mode gateway MBG1 charging-profile juniper detail Service Mode Status
                  Gateway Name    : MBG1
                  ...
                  Profile Name    : juniper
                  Service Mode    : Operational
      
    2. Place the MX Series router in configuration mode.
      user@host# configure
    3. On the gateway MBG1, place the charging profile named juniper in maintenance mode.
      user@host# set unified-edge gateways ggsn-pgw MBG1 charging charging-profiles juniper service-mode maintenance
    4. Commit maintenance mode.
      user@host# commit
    5. Verify that the charging profile is in active maintenance mode where configuration changes will be accepted for this object and all of its subhierarchies.
      user@host# run show unified-edge ggsn-pgw charging service-mode gateway MBG1 charging-profile juniper detail Service Mode Status
       
                  Gateway Name    : MBG1
                    ...
                  Profile Name        : Service Mode
                  juniper                   : Maintenance - Active Phase
    6. Exit maintenance mode and commit.
      user@host# delete unified-edge gateways ggsn-pgw charging service-mode gateway MBG1 charging-profile juniper service-mode user@host# commit
    7. Return the gateway to operational state.
      user@host# run show unified-edge ggsn-pgw gateway service-mode

    Results

    The charging profile is in active maintenance mode. You can change profile attributes and commit them.

    Published: 2011-11-16