Understanding Junos OS in FIPS Mode
Federal Information Processing Standards (FIPS) 140-2 defines security levels for hardware and software that perform cryptographic functions. The Juniper Networks MX Series 3D Universal Edge Routers or EX Series Ethernet Switches running the Juniper Networks Junos operating system (Junos OS) in FIPS mode comply with the FIPS 140-2 Level 1 standard.
Operating MX Series routers or EX Series Ethernet Switches in a FIPS 140-2 Level 1 environment requires enabling and configuring FIPS mode on the routers from the Junos OS command-line interface (CLI).
The Crypto Officer enables FIPS mode in Junos OS Release 18.3R1 and sets up keys and passwords for the system and other FIPS users.
For the features described in this document, the following platforms are supported:
LC MPC7E-10G with MACsec have to be installed on MX240, MX480, and MX960 to qualify FIPS.
LC EX9200-40XS with MACsec has to be installed on EX9204, EX9208, and EX9214 to qualify FIPS.
About the Cryptographic Boundary on Your router
FIPS 140-2 compliance requires a defined cryptographic boundary around each cryptographic module on a router. Junos OS in FIPS mode prevents the cryptographic module from executing any software that is not part of the FIPS-certified distribution, and allows only FIPS-approved cryptographic algorithms to be used. No critical security parameters (CSPs), such as passwords and keys, can cross the cryptographic boundary of the module unencrypted, for example, being displayed on a console or written to an external log file.
Virtual Chassis features are not supported in FIPS mode. Do not configure a Virtual Chassis in FIPS mode.
How FIPS Mode Differs from Non-FIPS Mode
Junos OS in FIPS mode differs in the following ways from Junos OS in non-FIPS mode:
Self-tests of all cryptographic algorithms are performed at startup.
Self-tests of random number and key generation are performed continuously.
Weak cryptographic algorithms such as Data Encryption Standard (DES) and MD5 are disabled.
Weak or unencrypted management connections must not be configured.
Passwords must be encrypted with strong one-way algorithms that do not permit decryption.
Administrator passwords must be at least 10 characters long.
Validated Version of Junos OS in FIPS Mode
To determine whether a Junos OS release is NIST-validated, see the compliance page on the Juniper Networks Web site(https://apps.juniper.net/compliance/fips.html).