Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Understanding Management Interfaces

 

The following management interfaces can be used in the evaluated configuration:

  • Local Management Interfaces—The RJ-45 console port on the device is configured as RS-232 data terminal equipment (DTE). You can use the command-line interface (CLI) over this port to configure the device from a terminal.

  • Remote Management Protocols—The device can be remotely managed over any Ethernet interface. SSHv2 is the only permitted remote management protocol that can be used in the evaluated configuration, and it is enabled by default on the device. The remote management protocols J-Web and Telnet are not available for use on the device.