Understanding the Common Criteria Evaluated Configuration
This document describes the steps required to duplicate the configuration of the device running Junos OS when the device is evaluated. This is referred to as the evaluated configuration. The following list describes the standards to which the device has been evaluated:
These documents are available at https://www.niap-ccevs.org/Profile/PP.cfm?archived=1.
Junos OS Release 19.1R2 is certified for Common Criteria with FIPS mode enabled on MX104 device. For regulatory compliance information about Common Criteria, and FIPS for Juniper Networks products, see the Juniper Networks Compliance Advisor
Target of Evaluation (TOE) is a device or system subjected to evaluation based on Collaborative Protection Profile (cPP).
Understanding Common Criteria
Common Criteria for information technology is an international agreement signed by several countries that permits the evaluation of security products against a common set of standards. In the Common Criteria Recognition Arrangement (CCRA) at https://www.commoncriteriaportal.org/ccra/, the participants agree to mutually recognize evaluations of products performed in other countries. All evaluations are performed using a common methodology for information technology security evaluation.
For more information on Common Criteria, see https://www.commoncriteriaportal.org/.
Supported Platforms and Hardwares
MX104 device in FIPS mode with the following hardware components are used to qualify NDcPPv2 certification with VPN-EP:
Crypto line card: MS-MIC-16G (https://www.juniper.net/documentation/en_US/release-independent/junos/topics/reference/general/mic-mx-series-ms.html)