Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configure FPCs in FIPS Mode

 

After enabling FIPS mode, configure the Flexible PIC Concentrators (FPCs) in the FIPS mode.

To bring the FPCs up, follow the below procedure:

  1. Enter configuration mode:
  2. Configure FIPS chassis on the switch:
  3. Install the new package on the switch:
    Note

    The package should be jpfe-fips*.tgz, for example, jpfe-fips-x86-32-18.1R1_tvp.1.tgz.

  4. Commit the configuration:
  5. Reboot the switch: