Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring the Device to Drop Unassigned IPv6 Packets

 

Before you configure the device to drop unassigned IPv6 packets, check the default configuration status of the device. From the operational mode enter the show usp flow configuration command.

In the output, the advanced options no_drop_unassigned_ipv6_address: disabled (default) option indicates that by default the device drops unassigned IPv6 packets.

To enable the device to drop unassigned IPv6 packets, use the following command:

To enable users to revert to the default configuration, use the following command: