Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Enter PIN Menu Option


You can enter the PIN after starting the Juniper Secure Connect and before establishing a connection. If you want to establish a connection using a certificate at a later time, then you can skip the PIN entry unless the certificate configuration requires it.

To enter your PIN:

  1. Navigate to Connection> Enter PIN from the menu. See Figure 1.
  2. Enter the PIN. PIN must be a minimum of six digits in length.
  3. Click OK.

You need a PIN to establish the connection with certificates successfully. At the first time of establishing a connection manually, you must enter the PIN. For subsequent manual connections, you can skip entering the PIN again. A correct PIN entry is indicated by a green PIN symbol.

Figure 1: Enter PIN Menu Option
Enter PIN Menu Option