Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Enter PIN Menu Option

 

You can enter the PIN after starting the Juniper Secure Connect and before establishing a connection. If you want to establish a connection using a certificate at a later time, then you can skip the PIN entry unless the certificate configuration requires it.

To enter your PIN:

  1. Navigate to Connection > Enter PIN from the menu. See Figure 1.
    Figure 1: Enter PIN Menu Option
    Enter PIN Menu Option
  2. Enter the PIN. Your PIN must be minimum of six digits in length.
  3. Click OK.

You need a PIN to establish the connection with certificates successfully. At the first time of establishing a connection manually, you must enter the PIN. For subsequent manual connections, you can skip entering the PIN again. A correct PIN entry is indicated by a green PIN symbol.