Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Statistics Menu

 
Summary

Juniper Secure Connect Statistics menu allows you to view the connection statistics information.

Click on the three vertical dots at the top right corner and select Statistics to view the following statistics information:

Figure 1 shows a example for connection statistics details for a VPN connection.

Figure 1: Connection Statistics Details
Connection Statistics
Details

Table 1 summarizes the fields in connections statistics.

Table 1: Connection Statistics

Statistics

Description

Time online

Shows the time a user has been connected with the same connection profile. Restarting the Juniper Secure Connect or changing the connection profile resets this value.

Total Tx

Shows the data sent or transmitted over the VPN tunnel into the remote network while being connected to the same connection profile. Restarting the Juniper Secure Connect or changing the connection profile resets this value.

Total Rx

Shows the data received over the VPN tunnel into the remote network while being connected to the same connection profile. Restarting the Juniper Secure Connect or changing the connection profile resets this value.

Timeout

This value shows 0 sec, if no timeout for the VPN session is used. If a timeout is used, the timeout shows the amount of seconds. The Juniper Secure Connect starts count down for the timeout as soon as no data is received over the VPN tunnel and resets as soon as data is received of the VPN tunnel.

VPN IP address

Shows the private IP address of Juniper Secure Connect.

Security Mode

Shows IPsec information.

WHAT'S NEXT

For more information on Juniper Secure Connect features and how to configure the options, see Connect Menu, Logbook Menu, Import/Export Menu, Reset PIN Menu, General Settings Menu, and About Menu.