Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

SMB Tail Log Source Parameters for iT-CUBE AgileSI

 

If JSA does not automatically detect the log source, add an iT-CUBE agileSI log source on the JSA Console by using the SMB Tail protocol.

When using the SMB Tail protocol, there are specific parameters that you must use.

The following table describes the parameters that require specific values to collect SMB Tail events from iT-CUBE agileSI:

Table 1: SMB Tail Log Source Parameters for the iT-CUBE agileSI DSM

Parameter

Value

Log Source Name

Type a name for your log source.

Log Source Description

Type a description for the log source.

Log Source type

iT-CUBE agileSI

Protocol Configuration

SMB Tail

Log Source Identifier

Type the IP address, host name, or name for the log source as an identifier for your iT-CUBE agileSI events.