Configuring Event Forwarding for Open LDAP
You can configure syslog forwarding for Open LDAP:
- Log in to the command-line interface for your Open LDAP server.
- Edit the following file:
- Add the following information to the syslog configuration
<facility> is the syslog facility, for example local4.
<IP address> is the IP address of your JSA console or Event Collector.
#Logging for SLAPD local4.debug /var/log/messages local4.debug @10.10.10.1
If your Open LDAP server stores event messages in a directory other than
/var/log/messages, you must edit the directory path.
- Save the syslog configuration file.
- Type the following command to restart the syslog service:
The configuration for Open LDAP is complete. UDP multiline events that are forwarded to JSA are displayed on the Log Activity tab.