Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

HP Network Automation

 

The JSA DSM for HP Network Automation collects events from HP Network Automation software.

The following table describes the specifications for the HP Network Automation DSM:

Table 1: HP Network Automation DSM Specifications

Specification

Value

Manufacturer

Hewlett Packard

DSM name

HP Network Automation

RPM file name

DSM-HPNetworkAutomation-JSA_version-build_number

.noarch.rpm

Supported versions

V10.11

Protocol

Syslog

Event format

LEEF

Recorded event types

All operational and configuration network events.

Automatically discovered?

Yes

Includes identity?

Yes

Includes custom properties?

No

More information

Hewlett Packard Network Automation (http://www.hpe.com/software/na)

To integrate HP Network Automation software with JSA, complete the following steps:

  1. If automatic updates are not enabled, download the most recent version of the following RPMs from the Juniper Downloads in the order that they are listed, on your JSA console:

    • DSMCommon DSM RPM

    • HP Network Automation DSM RPM

  2. Configure your HP Network Automation software to send LEEF events to JSA.

  3. If JSA does not automatically detect the log source, add a HP Network Automation log source on the JSA console. The following table describes the parameters that require specific values for HP Network Automation event collection:

    Table 2: HP Network Automation Log Source Parameters

    Parameter

    Value

    Log Source type

    HP Network Automation

    Protocol Configuration

    Syslog

    Log Source Identifier

    The IP address or host name of the device from where JSA collects HP Network Automation events.

The following table shows a sample LEEF message from the HP Network Automation DSM:

Table 3: HP Network Automation Sample Message Supported by the HP Network Automation Software

Event name

Low level category

Sample log message

Device Snapshot

Information

LEEF:1.0|HP|Network
 Automation|v10|Device Snapshot|
devTime=Wed Jul 06 08:26:45 UTC
 2016 devTimeFormat=EEE
 MMM dd HH:mm:ss Z yyyy
     src=127.0.0.1
      eventId=11111111
       usrName=UserName
   eventText=Snapshot of
 configuration taken