Mounting the iSCSI Volume Automatically
You must configure JSA to automatically mount the iSCSI volume.
Ensure that you moved the
/store file systems to an iSCSI storage solution.
- Add the iSCSI script to the startup information by typing
the following commands:
systemctl enable iscsi
- Enable the iscsi-mount service by typing the following
systemctl enable iscsi-mount
- Verify that the iSCSI device is correctly mounted by typing
the following command:
If you are configuring a high-availability (HA) environment, you must set up your secondary HA host by using the same iSCSI connections that you used for your primary HA host. For more information, see Configuring iSCSI in an HA Deployment.