Syslog Log Source Parameters for Fidelis XPS
If JSA does not automatically detect the log source, add a Fidelis XPS log source on the JSA Console by using the syslog protocol.
When using the syslog protocol, there are specific parameters that you must use.
The following table describes the parameters that require specific values to collect syslog events from Fidelis XPS:
Table 1: Syslog Log Source Parameters for the Fidelis XPS DSM
Parameter | Value |
|---|---|
Log Source type | Fidelis XPS |
Protocol Configuration | Syslog |
Log Source Identifier | Type the IP address or host name for the log source as an identifier for events from your Fidelis XPS devices. |