Syslog Log Source Parameters for Bridgewater Systems
If JSA does not automatically detect the log source, add a Bridgewater Systems log source on the JSA Console by using the syslog protocol.
When using the syslog protocol, there are specific parameters that you must use.
The following table describes the parameters that require specific values to collect syslog events from Bridgewater Systems:
Table 1: Syslog Log Source Parameters for the Bridgewater Systems DSM
Log Source name
Type the name of your log source.
Log Source description
Type a description for your log source.
Log Source type
Bridgewater Systems AAA Service Controller
Log Source Identifier
Type the IP address or host name for the log source as an identifier for events from your Bridgewater Systems appliance.