Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

SNMP Log Source Parameters for SolarWinds Orion

 

If JSA does not automatically detect the log source, add a SolarWinds Orion log source on the JSA Console by using the SNMP protocol.

When using the SNMP protocol, there are specific parameters that you must use.

The following table describes the parameters that require specific values to collect SNMP events from SolarWinds Orion:

Table 1: SNMP Log Source Psarameters for the SolarWinds Orion DSM

Parameter

Value

Log Source Type

SolarWinds Orion

Protocol Configuration

SNMPv2 or SNMPv3

Log Source Identifier

Type the IP address or the hose name of your SolarWinds Orion appliance to use as the identifier.