Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Adding a DSM

 

If your Device Support Module (DSM) is not automatically discovered, manually install a DSM.

Each type of log source has a corresponding DSM that parses and normalizes events from the log source.

  1. Download the DSM RPM file from the https://support.juniper.net/support/downloads/.
  2. Copy the RPM file to JSA.
  3. Using SSH, log in to the JSA host as the root user.
  4. Go to the directory that includes the downloaded file.
  5. Type the following command:
    # yum localinstall -y --disablerepo=* --nogpgcheck<DSM/PROTOCOL>
    Note

    The rpm -Uvh <rpm_filename> command line to install was replaced with the following command:

    # yum localinstall -y --disablerepo=* --nogpgcheck<DSM/PROTOCOL>
  6. Log in to JSA.
  7. On the Admin tab, click Deploy Changes.Note

    Uninstalling a DSM is not supported in JSA.