Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Installing the JSA 7.3.3 ISO

 

These instructions guide administrators through the process of installing JSA 7.3.3.

  1. Download the 7.3.3.20191031163225 ISO from the Juniper Customer Support website.

    https://support.juniper.net/support/downloads/

  2. Using SSH, log in to the Console as the root user.
  3. To run the ISO installer on the Console, type the following command:

    /media/cdrom/setup

    Note

    Installing JSA 7.3.3 should take approximately 2 hours on a Console appliance.

  4. Wait for the Console primary update to complete.
Note

In JSA 7.3.1 Patch 7, a kernel update was introduced to address issues with appliances failing to log in or list unit files. These issues could prevent the appliance from rebooting. This new kernel does not take effect until the appliance is rebooted. You might need to reboot your system manually for the kernel update to take effect.

To work around this issue, you must perform a restart of the appliance. To do this, type the reboot command, or use Integrated Management Module (IMM).

Result

A summary of the ISO installation advises you of any issues. If there are no issues, use SSH to log in to the managed hosts and start the installer on each host to run the setup in parallel.