JSA Risk Manager supports the Cisco Catalyst (CatOS) adapter.
The Cisco CatOS adapter collects device configurations by backing up CatOS network devices that JSA Risk Manager can access.
The following features are available with the Cisco CatOS adapter:
Neighbor data support
Telnet and SSH connection protocols
The following table describes the integration requirements for the Cisco CatOS adapter.
Table 1: Integration Requirements for the Cisco CatOS Adapter
Catalyst 6500 series chassis devices.
Note: The adapter for CatOS backs up only the essential switching port structure.
Multilayer Switch Feature Card (MSFC) CatOS adapters are backed up by Cisco IOS adapters.
Firewall Services Module (FWSM) CatOS adapters are backed up by Cisco ASA adapters.
Matches CATOS or Catalyst Operating System in SNMP sysDescr.
Required credential parameters
To add credentials in JSA log in as an administrator and use Configuration Source Management on the Admin tab.
Supported connection protocols
To add protocols in JSA log in as an administrator and use Configuration Source Management on the Admin tab.
Use any one of the following supported connection protocols:
Commands that the adapter requires to log in and collect data