Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Creating Your Virtual Machine

 

To install a virtual appliance, you must first use VMWare ESX to create a virtual machine.

  1. From the VMware vSphere Client, click File >New >Virtual Machine.
  2. Add the Name and Location, and select the Datastore for the new virtual machine.
  3. Use the following steps to guide you through the choices:
    1. In the Configuration pane of the Create New Virtual Machine window, select Custom.

    2. In the Virtual Machine Version pane, select a virtual machine hardware version that is supported by the version of VMWare ESXi that you are using. Use the following table to select a supported version.

      Table 1: Supported Virtual Machine Hardware Versions

      VMWare ESXi version

      Virtual machine hardware versions

      VMWare ESXi 6.0

      Versions 7 - 11

      VMWare ESXi 5.5

      Versions 7 - 10

      VMWare ESXi 5.1

      Versions 7 - 9

      VMWare ESXi 5.0

      Versions 7 and 8

    3. For the Operating System (OS), select Linux, and select Red Hat Enterprise Linux 7(64-bit).

    4. On the CPUs page, configure the number of virtual processors that you want for the virtual machine. For more information about CPU settings, see System Requirements for Virtual Appliances.

    5. In the Memory Size field, type or select the RAM required for your deployment. For more information about memory requirements, see System Requirements for Virtual Appliances.

    6. Use the following table to configure you network connections.

      Table 2: Descriptions for Network Configuration Parameters

      Parameter

      Description

      How many NICs do you want to connect

      You must add at least one Network Interface Controller (NIC)

      Adapter

      VMXNET3

    7. In the SCSI controller pane, select VMware Paravirtual.

    8. In the Disk pane, select Create a new virtual disk and use the following table to configure the virtual disk parameters.

      Table 3: Settings for the Virtual Disk Size and Provisioning Policy Parameters

      Property

      Option

      Capacity

      256 or higher (GB) for the installation.

      Your storage capacity depends on your event rate, the average size of your events, and your retention requirements.

      Disk Provisioning

      Thin provision

      Advanced options

      Do not configure

  4. On the Ready to Complete page, review the settings and click Finish.

Install the JSA software on your virtual machine.