Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Recovering a Secondary HA Console or Non-console

    You can install or recover a secondary high-availability (HA) JSA or non-console (managed host) appliance.

    1. Prepare your appliance.
      1. Install all necessary hardware.

      2. Connect a notebook to the serial port on the rear of the appliance, or connect a keyboard and monitor to their respective ports.

        For more information on your JSA appliance or appliance ports, see the Juniper Secure Analytics Hardware Guide.

      3. Turn on the system and log in as Username: root

        Note: The user name is case-sensitive.

      4. Press Enter.

      5. Press the Spacebar to advance each window then type yes to accept the agreement and press Enter.

    2. Follow the instructions in the wizard.
    3. Configure the JSA network settings.
    4. Select Next and press Enter.

      Note: If you are changing network settings with qchange_netsetup, select Finish and press Enter. For more information about changing network settings, see the Juniper Secure Analytics Installation Guide or the Log Manager Installation Guide.

    5. Configure the JSA root password:
      1. Type your password, then select Next and press Enter.

      2. Retype your new password. Select Finish and press Enter.

        Note: This process can take several minutes.

      3. Press Enter to select OK.

    6. Log in to the JSA user interface.

    Configure the HA Cluster.

    Modified: 2017-09-13