Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Juniper Identity Management Service Configuration Overview

 

Table 1 lists the basic tasks to configure Juniper Identity Management Service.

Note

These tasks assume that you already have your SRX Series devices and data sources installed, configured, and operational at your site.

Optionally, if your network environment uses Contrail Service Orchestration (CSO), these tasks assume that you already have CSO installed, configured, and operational at your site.

Table 1: Juniper Identity Management Service Configuration Tasks

Task

Description

Action

Prepare your SRX Series devices

Perform a series of configuration taks to prepare the SRX Series devices in your network to work with Juniper Identity Management Service.

For SRX Series devices running Junos OS Release 15.1X49-D100, 17.4R1, or a later release, follow the instructions for configuring the Advanced Query feature in Preparing SRX Series Devices Running Junos OS Release 15.1X49-D100, 17.4R1, or Later.

For SRX Series devices running Junos OS Release 12.3X48-D45 or later, follow the instructions for Preparing SRX Series Devices Running Junos OS Release 12.3X48-D45 or Later.

Prepare your data sources

Perform a series of configuration taks to prepare the data sources in your network to work with Juniper Identity Management Service.

Data Source Configuration Overview

Install Juniper Identity Management Service

Install Juniper Identity Management Service on a Windows server

System Requirements for Installing Juniper Identity Management Service

Installing Juniper Identity Management Service

Prepare CSO (optional)

If your network deployment includes CSO, perform a series of configuration taks to prepare CSO in your network to work with Juniper Identity Management Service.

Preparing CSO Identity Management

Login to Juniper Identity Management Service

Log into the JIMS server and perform initial setup activities.

Logging in to the JIMS Server

Configure SRX Series devices as clients of JIMS server

Configure Juniper Identity Management Service to connect to the SRX Series devices in your network.

Configuring the Connection to an SRX Series Device

Configure CSO as client of JIMS server (optional)

If your network deployment includes CSO, configure Juniper Identity Management Service to connect to CSO in your network.

Configuring the Connection to a CSO Client

Configure Juniper Identity Management Service data sources

Configure Juniper Identity Management Service to connect to the data sources in your network.

JIMS Server Data Source Configuration Overview