Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Related Spec File Parameters

 

If you want to save the imported traffic in your network scenario, go to File > Save in Spec Dir, for example, to save any new configurations to the specification file.

In the File Manager, right click on the newly created (or refreshed) specification file and select from the popup menu Spec File > Modify Spec, or select Edit to view the text version of the spec.

The traffic-related specification file parameters are described below.

Figure 1: Spec file
Spec file

Interface Traffic Parameters

Description

egress

The egress file contains egress traffic of the network’s interface load. Egress traffic specifies traffic that is going out of the network’s interfaces. This data is used for calculating link utilization and load.

Results can be viewed graphically from the Standard map’s “Utilization Legends > Measured Link Util” legend.

ingress

The ingress file contains ingress traffic of the network’s interface load. Ingress traffic specifies traffic that is going into the network’s interfaces. This data is used for calculating link utilization and load.

trafficload

24-period traffic measured on interfaces. When importing traffic, the trafficload file is automatically named trafficload.runcode and placed in the trafdir. Results can be viewed graphically from the Standard map’s “Utilization Legends > Demand Cos Util” legend.

trafdir

The location of the interface traffic daily directories repository.

Tunnel traffic Parameters

Description

t_trafficload

t_trafficload

tunneltrafdir

The location of the tunnel traffic daily directories repository.