Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?




An MPLS ping is used to check that echo requests are sent over the tunnel as MPLS packets with the “ping mpls rsvp lsp-name detail” command.

The MPLS Ping can also be accessed from the Diagnostics Manager, Ping > Device From Device option, when clicking the Advanced button and selecting the relevant mpls ping command.

Additionally, the MPLS Ping can be accessed from Network > Elements > Tunnels. Right-click on a tunnel and select “MPLS RSVP Ping.” (Note that for the MPLS ping feature to work, the destination (egress) router must first be configured with on the loopback lo0 interface.)

Figure 1: MPLS Ping Results
MPLS Ping Results