Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Default Inputs

    The next page contains tabs that allow the user to specify different options that will be applied when importing configuration files.

    Figure 1: Selecting the Output Directory and Runcode

    Selecting the Output Directory and Runcode
    1. On the Default tab are shown the most common import directory options. The subdirectories will be automatically populated if they have the following names: config, interface, bridge, tunnel_path, transit_tunnel, equipment_cli. Otherwise, click on the magnifying glass to browse for the directory. To select more than one directory, select the button with two magnifying glasses. In the advanced browser, a subfolder can be expanded or collapsed by clicking on the “+” or “-” hinges to the left of each entry. Select the desired subdirectories to be involved in the config import by clicking on the box or circle to the left of each.
    2. The following information can be collected via IP/MPLSView’s online module, or a third party collection software.

      Option

      Description

      Corresponding Text Interface Option

      Config Directory

      This directory contains your router configuration file obtained using commands like the following:

      Juniper:

      show configuration | display inheritance

      Cisco:

      show running-config

      Interface Directory

      This directory contains interface bandwidth data retrieved using CLI commands. Read the CLI results of “show interface” on the router to get the bandwidth of the interfaces and save it to a file. The CLI commands are:

      Juniper:

      # show configuration | match “host-name”
      # show interfaces | no-more

      To extract the hostname, use the following command:

      # show configuration system host-name

      Cisco:

      # show running | include <hostname>
      # show interfaces

      -i interfaceDir

      VLAN Discovery directory

      This directory contains the intermediate results after parsing SNMP output of layer 2 switches collected by IP/MPLSView, usually in the “intermediates” directory. Alternatively, the raw SNMP results collected by IP/MPLSView in the “bridge” directory can be specified here, and the parsing will be done to create the intermediates directory before importing it using this config extraction wizard.

      -vlandiscovery
      vlandir

      Switch CLI directory

      This directory contains CLI output of layer 2 switches, which can be used to stitch up the physical and Layer 2 topology. e.g., “show cdp neighbor detail” for Cisco.

      Each file should be preceded with a line indicating the hostname. For example, “host-name” for Juniper and <hostname>” for Cisco.

      -EXSW EXSWdir

      Tunnel path

      MPLS Tunnel Extraction retrieves the actual placement of the tunnel and the status (up or down) of the LSP paths by parsing the output of the Juniper JUNOS command:

      Juniper:

      show mpls lsp statistics ingress extensive

      Cisco:

      show mpls traffic-eng tunnels

      Each file should be preceded with a line indicating the hostname. For example, “host-name” for Juniper and <hostname>” for Cisco.

       

      Transit Tunnel

      This option is similar to Tunnel path, except that in addition to ingress tunnels, it also includes FRR tunnels. This directory includes the output of the Juniper JUNOS command:

      Juniper:

      show rsvp session ingress detail
      show rsvp session transit detail

      Cisco:

      show mpls traffic-eng tunnels backup

      Each file should be preceded with a line indicating the hostname. For example, “host-name” for Juniper and <hostname>” for Cisco.

       

      Equipment CLI

      This directory contains the output of CLI commands related to equipment inventory, one file per router. See /u/wandl/db/command/<vendor>.cli to see the list of commands.

       

      Equipment SNMP

      This directory contains the output of SNMP commands related to equipment inventory which can be collected by the online module via Inventory > Hardware Inventory, Load > Collect Inventory into /u/wandl/data/collection/.LiveNetwork/equipment.

       

    Modified: 2017-06-01