Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
ContentIndex
  
[+] Expand All
[-] Collapse All

No index entries found.

Collecting Supplementary Device Data

This chapter describes how to collect data from the network through the User CLI Collection task within the Task Manager as well as through the device’s right-click menu.The data collected is the output of various specified Command Line Interface (CLI) “show” commands.

Use this to collect additional “show” command data other than the config file, interface, and tunnel information available to the Scheduling Live Network and Network Data Collection task described in Chapter 7, Live Network Collection .

You must have a live network (File>Open Live Network) or a router spec opened.

You also must have set up a profile for the network routers from which you want to collect data as described in Chapter 3, Setting Up Device Profiles .

Following is a high-level, sequential outline of the router data collection process and the associated, recommended procedures.

  • Run show commands from the node right-click menu as described in Run CLI.
  • Access the Task Manager windows and create a User CLI Collection task as described in User CLI Collection Task.
  • Access Connect to Device from the node right-click menu as described in Direct Router Access and Easy Command Line Interface Operation.
  • View live tunnel events and tunnel revision history from the node right-click menu as described in View Live Tunnel Events and Revisions.

Modified: 2015-12-29