Edit Configuration of Ports

You can edit the configuration of a port either by using a port profile or manually.

If a profile is already deployed, edit the profile, and then redeploy for the changes to take effect.

When using a port profile to edit ports, you can:

Procedure

To edit the configuration of one or more ports:

  1. Select one or more ports and click More > Edit Configuration. Alternatively, right-click the ports and click Edit Configuration.

    The Edit Port(s) page appears.

  2. Do one of the following:

    For Options, select one of the following:

  3. Click Next.

    Deployment options appear.

  4. (Optional) Select the Do not deploy option if you want to only save the edited configuration in CSO, but not push and commit the configuration to the switch.
  5. For the Type field, do one of the following:
  6. Click Next.

    A summary of all the port profile parameter appears.

  7. (Optional) Click Edit to revisit the settings and make further changes.
  8. Click OK.

    If you select the Run now option, a job is created to deploy the profile at once; otherwise, the job to deploy is created on the date and at the time that you scheduled.

    During the deployment (that is when the deploy is executing), the Deployment status of the port is set to Pending Deployment, on the Ports tab of the Devices page.

    If the deployment job completes successfully: