Add a Protocol Endpoint

Use the Protocols page to add a new protocol, which you can specify as a source endpoint or destination endpoint in firewall filter terms.

Procedure

To add a protocol:

  1. Select Configuration > Shared Objects > Protocols.

    The Protocols page appears.

  2. Click the add icon (+) to add a new protocol.

    The Add Protocol Endpoint page appears.

  3. Complete the configuration according to the guidelines provided in Table 264.

    Note Fields marked with * are mandatory.

  4. Click OK to save the changes. If you want to discard your changes, click Cancel instead.

    The new protocol is created. You are returned to the Protocols page where a confirmation message is displayed.

Table 264 provides guidelines on using the fields on the Add Protocol Endpoint page.

Table 264: Fields on the Add Protocol Endpoint Page

 

Field

Description

Protocol Number

Enter a valid protocol number.

Range is 0-255.

Example: egp (8), esp (50), gre (47), icmp (1), igmp (2), ipip (4), ospf (89), pim (103), rsvp (46), tcp (6), udp (17)

Description

Enter a description for the protocol.

WHAT'S NEXT

After adding protocol, you can specify the protocol as source endpoint or destination endpoint in firewall filter terms, see Add Terms to Firewall Filters.