Cisco CSR-1000v VNF Configuration Settings

You can configure the Cisco CSR-1000v virtualized network function (VNF) from Configuration > Network Services > Service Name > Overview > Service Configuration. Your service provider usually configures base settings for the virtual machine (VM) in which the virtualized network function (VNF) resides and you configure settings for the service, such as policies. Use the information in the following tables to provide values for the available settings:

Table 131: Fields for the CSR-1000v Base Settings

 

Field

Description

Host Name

Specify the hostname of the VM.

Example: host1

Loopback Address

Specify the IPv4 loopback IP address.

Example: 10.0.2.50

Name Servers

Specify the fully qualified domain names (FQDNs) or IP addresses of one or more DNS name servers.

Example: 10.0.2.15

NTP Servers

Specify the FQDNs or IP addresses of one or more NTP servers.

Example: ntp.example.net

Table 132: Fields for the CSR-1000v Firewall Settings

 

Field

Description

Left Interface

Specify the identifier of the interface that transmits data to the host.

Example: GigabitEthernet2

Right Interface

Specify the identifier of the interface receiving data transmitted by the host.

Example: GigabitEthernet3

Left to Right Allowed Apps

Select the applications from the drop-down list for which the policy is enforced in outgoing packets. The following applications are available:

  • http

  • https

  • telnet

  • ftp

  • tcp

  • udp

  • icmp

Example: http, https

Right to Left Allowed Apps

Select the application from the drop-down list for which the policy is enforced for incoming packets. The following applications are available:

  • http

  • https

  • telnet

  • ftp

  • tcp

  • udp

  • icmp

Example: ftp, udp