Configuring Layer 2 Bridging Port Parameters
Before you configure layer 2 bridging port parameters, you must configure the port’s operational mode for serial aggregation. See Enabling Ports for Layer 2 Bridging.
To configure layer 2 bridging port parameters:
- From the CTP Main menu, select 5) Node Operations menu.
========================================================================== = (nova_45 06/06/08 21:43:33 GMT) | CTP Main Menu ========================================================================== Please select a number from the following list: ------------------------------------- 0) Exit to Shell 1) Bundle Operations 2) Node Synchronization 3) Node Summary 4) Node Diagnostics 5) Node Operations 6) Save Database to Flash ------------ Your choice [5]:
- Select 3) Configure network settings.
========================================================================== = (nova_45 06/06/08 21:47:24 GMT) | Node Operations Menu ========================================================================== Please select a number from the following list: ------------------------------------- 0) Back to Previous Menu 1) Change Node Date/Time 2) Display network settings 3) Configure network settings 4) Initialize Database 5) Ping IP address 6) Traceroute IP address 7) ssh to another host 8) System descriptor field: 9) Reboot Node 10) Powerdown Node 11) Display ethernet media 12) Config ethernet media 13) Set your password 14) System port speed range: 0 kHz - 12288 kHz 15) Config security profile ------------ Your choice [0]: 3
- In the Network Configuration menu, select 10) Port operations (PBS/bridge).
========================================================================== = (nova_45 06/06/08 21:49:05 GMT) | Network Configuration Menu ========================================================================== Please select a number from the following list: ------------------------------------- 0) Back to Previous Menu 1) Supported Protocols: IPv4 only 2) IPv4 Configuration 3) IPv6 Configuration 4) Virtual IP addresses 5) OAM port (IPv4): 16 6) Data packet protocol: 47 7) OAM port (IPv6): 32 8) VLAN Configuration 9) Current Configuration (active on reboot) 10) Port operations (PBS/bridge) 11) Config port operational mode (CE/PBS/bridge) ------------ Your choice [0]: 10
- Type the port you want to configure and press Enter.
Please choose from the following PBS/bridge ports: 0 6 7 [0]: 0
The Operations menu is displayed.
- Select 2) Config to configure
the port.
========================================================================== = (nova_45 06/06/08 22:44:59 GMT) | Operations Menu for Port se-0/0 ========================================================================== Please select a number from the following list: ------------------------------------- 0) Back to Previous Menu 1) Query 2) Config 3) Activate 4) Disable 5) Delete 6) Advanced... ------------ Your choice [2]:
- Set encapsulation type, interface/VLAN, static destination MAC address, AutoMAC, AutoArp, and Cryto Resync parameters. See Enabling Ports for Layer 2 Bridging for more information.