Configuring the Low-Speed CTP Bundle for TDM/TDC Operation (CTP Menu)
Configure the low-speed bundle on an odd-numbered port that is one higher than the corresponding high-speed bundle.
Before you begin:
Disable the bundle before you modify the bundle options.
To configure the low-speed CTP bundle using CTP Menu:
- From the CTP Main Menu, select 1) Bundle Operations.
- Select 1) CTP.
- Select a bundle from the list. The bundle must be configured
on an even-numbered port.
If you select an active bundle, you are prompted to disable the bundle before configuring it.
- Select 3) Port Config.
- Select 3) Clock Config.
- Select 1) Port Clock Config.
- Select 8) TDM/TDC - Interleaved Slow Port.
Do not configure any other bundle parameters.