Configuring Multiservice TDC Mode Parameters for CTP Bundles (CTP Menu)
Before you begin:
Disable the bundle before you modify the bundle options.
To configure Multiservice TDC mode port parameters using the CTP Menu:
- From the CTP Main Menu, select 1) Bundle Operations.
- Select 1) CTP.
- Select a bundle from the list.
If you select an active bundle, you are prompted to disable the bundle before configuring it.
- Select 3) Port Config.
- Select 2) Interface.
- Select 1) Typeand set the type to Optional Interface: MultiSvc.
- Follow the onscreen instructions and configure the options as described in Table 1.
Field | Function | Your Action |
---|---|---|
Mode |
Specifies that the bundle will run in TDC mode. |
Select TDC/IRIG. |
Src/Dest |
Specifies the direction of the circuit. |
Select one:
|
NRZ/Rate |
Specifies the data rate on the IP connection. |
Enter a number from 500 through 5,000,000 bps. The port speed must be a multiple of 500 bps. |
IRIG Output Level |
Specifies the output level. Note the following information about the values:
|
Enter a number from 0 through 255. |