Adding a Bundle (CTP Menu)
To add a bundle using the CTP Menu:
- From the CTP Main Menu, select 1) Bundle Operations.
- Select the type of bundle that you want to configure.
Before you create a VComp bundle, you must ensure that the CTP system has a VComp card installed. The CTP system displays a warning message if no VComp card is installed. If you create a VComp bundle on a CTP system that does not have a VComp card installed and try to activate it, the CTP system displays the following warning message:
There is not enough system DSP resource for the bundle.
The bundle remains disabled until you install a VComp card and activate the bundle again. If you remove the VComp card from a CTP system that has an active VComp bundle, the Run state of the VComp bundle changes to MisCfg.
- Enter add to add a new bundle.
- Select the port you want to attach the bundle to.